Xantrex Trace Series Inverters/Chargers
Xantrex C-Series Multi-Function Controllers

  • Now featuring models at 35, 40, and 60 amps, these multi-controllers can be used for PV charge control, DC load
    control, DC diversion.
  • They only operate in one mode, however, so PV charge control and DC load control requires two controllers.
  • The 35- and 60-amp controllers can be manually selected for 12 or 24 volts.
  • The 40-amp controller will do 12, 24, or 48 volts.
  • Two-stage lightning and surge protection is included.
  • The three-stage (bulk, absorb, float) PV charge control uses solid-state pulse width modulation control for the most
    effective battery charging.
  • A battery temperature sensor is optional, and recommended if your batteries will see temperatures below 40°F or
    above 90°F.
  • The DC load controller has adjustable disconnect and auto-reconnect voltages with a time delay for heavy surge
    loads.
  • Electronic short-circuit protected. 9" x 5" x 2", weighs 4 lb.
  • Certified by ETL to UL standards.
  • Two-year mfr’s warranty. USA.
  • RG-25-027Xantrex C-35 Multi Controller
  • RG-25-017Xantrex C-40 Multi Controller
  • RG-25-028Xantrex C-60 Multi Controller
  • RG-25018Xantrex C-Series Optional LCD Display
  • RG-25774Xantrex Remote C-Series LCD Display
  • RG-27319Xantrex Battery Temperature Sensor
C-Series Controllers
www.millenniumplanet.com